Quick Answer: How Do You Clean A Salt Chlorinator Cell?

How often do you have to clean the cell of a salt chlorinator?

every 2-6 monthsThe number one maintenance item for a salt water chlorinator is to clean the salt cell regularly, every 2-6 months, but only as needed.

Mineral deposits bridge the space between the metal plates, and not just in hard water areas..

How can I tell if my salt cell is bad?

The most common concern we get for salt system owners is that the the salt cell is not producing chlorine….How To Troubleshoot Problems with Your Salt Cell”Check Salt” & “Inspect Cell” light is flashing or ON.Just the “Inspect Cell” light is ON.”High Salt” light is ON.”No Flow” light is flashing.

How long does it take to clean a salt cell?

Let the cell soak for 15-20 minutes. If you do not have a cell stand, carefully place the cell in a plastic bucket and add the acid wash solution until the plates are covered. Make sure not to cover the cell electrical connections. Again, let the unit soak for 15 minutes.

What does check salt cell mean?

If both the “check salt” and the “inspect cell” lights stay on, it most likely means that no chlorine is being produced at this time and your salt level fell below 2300 ppm. Both lights will also stay on if the controller is set to the wrong turbo cell type, or if the cell is unplugged.

How much does a salt cell cost?

Replacing the salt cell costs $700–$1100. Replacing the control board costs $500–$900. You can extend the lifespans by maintaining a consistent salt level, cleaning the cell only when needed, and using the reverse polarity function.

Can a salt cell be rebuilt?

We developed a unique method to rebuild these cells and make them perfectly functional to produce the chlorine you need for your salt water pool ! Order a rebuilt cell, receive it, put the old one back in the box and send it back to us for a core credit, it will be rebuilt for the next customer. 100% recycled !

Can you clean a salt cell with vinegar?

Fill a deep container, such as a bucket, with 1 part white vinegar to 2 parts water.

Why is my salt cell not working?

First, check power. If your salt cell is plugged into an GFI outlet, make sure that the test button is not popped, or tripped. If your salt system is hardwired, variations in voltage could cause the controller to go a little haywire. Secondly, maintain the proper salt level in the pool.

When should you clean a salt cell?

Most salt cells will need cleaning at least twice a year. Some may need it as often as every two months. It mostly depends on how hard your water is, as that’s what causes buildups. Check on it every two months to see if it needs cleaning until you figure out how often yours will need to be cleaned.

What should my salt chlorinator be set at?

Try to maintain a consistent salt level of between 2,700 parts per million (ppm) and 3,400 ppm, with 3,200 ppm being ideal. Clean the chlorinator cell at least once a season or as needed. During lightning storms, turn off the chlorinator to reduce the risk of power surges that could damage the control board.

How much salt do I add to my pool?

The ideal salt level is between 2700-3400 ppm (parts per million) with 3200 ppm being optimal. Before adding salt to your pool, test the water to check your salt level.

How do you clean a salt water pool filter?

Make a solution of five parts clean water to one part of muriatic acid, pouring the acid directly into the water. Do not mix it the other way around. Cap the cell, then pour the solution into the salt cell. It should foam for about ten minutes.

Can I put vinegar in my pool?

White Vinegar Mix a 50/50 solution of vinegar and water, dip a sponge or soft cloth into it, and scrub that residue away. It’s OK if a little bit of it makes it into the pool water, but if you’re concerned, test the water after using vinegar, and adjust any levels if necessary.

What dissolves salt buildup?

You can safely use vinegar or CLR to remove the salt creep, but the important factors are applying the treatment long enough and using enough elbow grease. Keeping the glass immersed in either vinegar or CLR over a period of time will dissolve the mineral deposits.

How do I know if my salt chlorinator is working?

If you have a clear housing around your salt cell, you can inspect the cell for cleanliness without dissassembly. When operating, you should also see very tiny bubbles inside the chamber, producing what looks like cloudy water – that’s chlorine being created!

How do you clean a salt chlorinator?

How to Clean your Salt Water Chlorinator CellMake a cleaning mixture of 1/10 parts Hydrochloric Acid to water (always add Hydrochloric acid to water).Turn the filtration system off.Remove Salt Cell from the housing.Add the Salt Cell to the cleaning mixture making sure there is little to no contact with the terminals.More items…•

How do you clean a salt cell?

In a clean plastic container, mix a 4:1 solution of water to muriatic acid (one gallon of water to one quart of acid). Caution: ALWAYS ADD ACID TO WATER – NEVER ADD WATER TO ACID. Fasten the Turbo Cell to Cell Cleaning Stand with the cord side down.

How long does a salt water chlorinator cell last?

about five yearsThis is all possible thanks to your pool’s salt chlorine generator cell. With proper care, a cell will last about five years. Eventually, though, it will need to be replaced.

What causes a salt cell to fail?

Salt cells fail for a few different reasons, the main reason being lack of proper maintenance. It is very important to check the cell regularly for excessive buildup. … Use a cleaning kit designed for salt cells to keep the plates clear of buildup. Another common cause of salt cell failure is improper water balance.